Datagrabber™

How the DataGrabber Works

The DataGrabber connects to a Levelogger's Direct Read Cable; alternatively, a Direct Read to Optical Adaptor allows you to connect it directly to a Levelogger's optical end. The DataGrabber connects to an AquaVent Wellhead using a Connector Cable, or directly to a LevelVent Wellhead. The USB flash drive key is plugged into the socket on the front of the DataGrabber.

A push-button on the DataGrabber starts the downloading process. All of the data in the datalogger's memory is transferred to the USB device. The DataGrabber comes with a 512 Mb USB flash drive key; it is also compatible with most other USB flash drives. The datalogger is not interrupted if it is still logging. The data in the datalogger memory is not erased.

A light changes colour to indicate when the DataGrabber is properly connected, when the data transfer is taking place, and when the data has been successfully downloaded. The DataGrabber uses one 9 volt alkaline or lithium battery that is easy to replace when required.

Features of the DataGrabber

• One push-button to download data
• Inexpensive and easy to transport
• Compatible with most USB flash drive keys
• Connects to a Levelogger's Direct Read Cable/Adaptor or LevelVent/AquaVent Wellhead
• Uses separate, replaceable 9V battery
• LED light to indicate operation
• Data transfer does not interrupt running Levelogger