MuST FBG Strain Sensor

The FBG deformation strain are transducers that transform a static or dynamic distance variation into a change in reflected wavelength of a pre-stressed Fiber Bragg Grating that can be measured with SMARTEC’s FBG reading units.

The strain sensors are designed to be bonded or spot welded to structures and components (metallic, concrete, etc.). These sensors are equivalent fiber optic versions of the conventional resistance strain gauges but completely passive, offering inherent insensitivity to environmental induced drift.

The polyimide strain sensor is the equivalent of the electrical strain gauge and can be installed using the same supplies.

The weldable strain gauge is designed to be spot welded to metallic surfaces, offering a significant increase of productivity in the installation process. This sensor has an optional metallic protection cover for installation in severe environments.

The composite strain gauge is a light-weight and rugged sensor for application in both steel and concrete structures, where the FBG optical fiber is encapsulated in Carbon Fiber  Reinforced Polymer (CFRP).

These sensors feature high accuracy and resolution, and immunity to electric sparks and EMI/RFI. They are compatible with most common FBG measurement units and suitable for remote sensing, being possible to install them kilometers away from the measurement unit and connect  several sensors in a single optical fiber.

Available Products

MuST FBG Strain Sensor
[MuST FBG Strain Sensor]
Please contact for pricing

-

Product Details

Specifications

   

Central wavelengths:

1510 to 1590 nm.   Max. 12 sensors on same chain.

Measurement range:

±2’000 με

Accuracy:

±2 με

Resolution:

±1 με

Sensitivity:

1.2 pm/ με

Spectral width (FWHM):

< 0.2 nm

Reflectivity:

> 75%

Insertion loss:

< 0.1 dB

Relative humidity:

< 90% at 80º C

Operating temperature:

-20 to 80º C

Cross sensitivity:

10 pm/ºC

Packaging:

Polyimide film, Stainless steel, Composite material

Dimensions:

Polyimide 40 x 12 x 0.25 mm, Weldable 45 x 15 x 0.3 mm, Composite 100 x 20 x 0.9 mm

Cable types:

Ø 0.9 mm, Ø 3 mm  Indoor, Ø 3 mm  Outdoor

Weight:

Polyimide 5 g, Weldable 5 g, Composite 25 g