AQUAGUARD GROUT - 50LB BAG.

AQUAGUARD® single-sack grout containing granular Wyoming sodium bentonite is blended with inorganic additives. The grout is designed for sealing the annular space around monitor or water well casing.

Be sure to sign into your MyRice account for preferred pricing. Get an account today

Available Products

AQUAGUARD GROUT - 50LB BAG.
[BARAQUAGUARD]
Regular Price: $31.61
Member Price: Sign in to View
- +

-

Product Details

APPLICATION / FUNCTION

Grout plastic and steel casings in monitor or water wells. Seal downhole instruments in test and observation holes. Seal cathodic protection installations.

ADVANTAGES NSF/ANSI Standard 60 certified. Low-permeability, flexible seal helps prevent commingling of aquifers and entry of surface contaminants. Does not contain any polymers. No heat of hydration, no damage to plastic casing due to temperature elevations.

RECOMMENDED TREATMENT

1. Pre-treat make-up water with Soda Ash to less than 100 mg/L total hardness.

2. Add one 50 lbs (22.7 kg) sack of AQUAGUARD grouting material into 14 gals (53 L) of circulating fresh water over a 20 - 30 second interval. The resulting slurry contains 30% active solids and has a slurry density of 10.1 lbs/gal, or 1.21 g/cm³.

3. Immediately tremie the grout into place after addition of AQUAGUARD grouting material.

Note: The slurry should contain suspended, unyielded bentonite granules which are allowed to hydrate and swell in situ.

Do not over mix and do not use a centrifugal pump

+

Documentation

Name
Description
Action
Document Name: Aquaguard Grout 
Document Type: Spec Sheet